ART.108

Grinding machine

ART.108 - Grinding machine

General technical info

Power supply
400 | 50 | 3
Volt|Hz|Phase
Motor power
0,75- 1,10 ( 1 - 1,5 )
kW ( hp )
Motor speed
1400 - 2800
rpm
Acoustic emission
70
dB
Overall dimension (Width x Depth x Height)
850 x 610 x H. 1200
mm
Weight standard machine
115
kg

Grinder unit

Grinding wheel maximum external size
ø 200
mm
Motor shaft diameter
ø 20
mm
Grinding wheel maximum wide size
25
mm
Peripheral speed
30 - 15
m/sec

Polisher - Buffer unit

Brush maximum external size
ø 200
mm
Motor shaft diameter
ø 20
mm
Brush maximum wide size
70
mm
Peripheral speed of brush
30 - 15
m/sec

Standard Equipments

Machine respect CE stamp of compliance
Machine respect CE stamp of compliance
- Machine with CE conformity mark made respecting the requirements of the most recent
   directives concerning it.
- Machine complete with instruction manual complete with CE conformity certificate, test sheet and
   exploded view with relative spare parts list.
- Machine equipped with a set of service keys suitable for the adjustment and maintenance of the machine.
Guarantee of European standards
Guarantee of European standards
The stringent tests guarantee that all the requisites and standards necessary to obtain the guarantee in accordance with European standards are respected. Since the project we dedicate a lot of care and attention to making the machine with high quality level to deliver machines that last over time.
Base
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Electrical panel
Low voltage electric controls with padlock device integrated in the main electric switch.
Electronic brake card
Emergency stop with electronic motor braking with safety anti-reset function.
Motor
Motor 2 speeds
Polishing cover
Carter adjustable for a comfortable and precise positioning of the operator and with predisposition connection system.
Locking accessories
Locking and reducing steel flange for brush, flap wheel with spacers and clamping nuts.
Locking accessories
Locking and reducing steel flange for grinding wheel with spacers and clamping nuts.
Support
Plan special adjustable support according to the diameter of the grinding wheel.
Disc grinding wheel
Grinding wheel disc mounted on the machine ready for use.
Grinder cover
Cover with predisposition connection system with predisposition connection system.
Anti-spark repair
Transparent protection arrester with friction joint.

Optional Equipments

IA-2: DUST EXTRACTOR - TWO CONNECTIONS
cod. IA-2:  DUST EXTRACTOR - TWO CONNECTIONS
DUST EXTRACTOR kit with two suction mouth: complete of dust filter bag in flexible aluminum pipes and hose clamps. The extractor is mounted inside the base and wired to the electrical panel.TECHNICAL FEATURES- Motor: Volt 400 - Rpm 2800 - kW 0,55- Max flow rate: 1.000 m3 / h- Max total pressure: 85 mm H2O
This product data sheet does not constitute a contractual obligation.
We reserve the right to modify and/or improve our machines without prior notice.
Some photographs and illustrations are purely demonstrative and may differ from the real ones.