ART.115

Tools sharpening machine

General technical info

Power supply
400 | 50 | 3
Volt|Hz|Phase
Motor power
1,9 - 1,1 ( 2,5 - 1,5 )
kW ( hp )
Motor speed
2800 - 1400
rpm
Acoustic emission
70
dB
Overall dimension (Width x Depth x Height)
850 x 650 x H. 1200
mm
Weight standard machine
110
kg

Tools sharpener

Cup grinding wheel dimension
200
mm
Sharpening angle
- 90 ÷ + 90
°
Support table dimension
390 x 150
mm
Support table revolution
- 45 ÷ + 45
°
Peripheral speed
30 - 15
m/sec
Operators
1
No.
Stations
2
No.

Standard Equipments

Machine respect CE stamp of compliance
- Machine with CE conformity mark made respecting the requirements of the most recent
   directives concerning it.
- Machine complete with instruction manual complete with CE conformity certificate, test sheet and
   exploded view with relative spare parts list.
- Machine equipped with a set of service keys suitable for the adjustment and maintenance of the machine.
Guarantee of European standards
The stringent tests guarantee that all the requisites and standards necessary to obtain the guarantee in accordance with European standards are respected. Since the project we dedicate a lot of care and attention to making the machine with high quality level to deliver machines that last over time.
Base
Strong base with anti-vibration rubbers at the base and a useful shelf for tools inside.
Electrical panel
Low voltage electric controls with padlock device integrated in the main electric switch.
Electronic brake card
Emergency stop with electronic motor braking with safety anti-reset function.
Motor
Motor 2 speeds
Support
Special support Floor tiltable with graduated indicator -45 ° to +45 ° and intermediate positions.Floor axially adjustable support particular, to maintain the minimum distance with the cup grinding wheel.
Vernier
Vernier graduated to set the tool inclination to work.
Locking accessories
Locking and reducing steel flange for brush, flap wheel with spacers and clamping nuts.
Cup grinding wheel
cup grinding wheel mounted on the machine ready for use.
Grinder cover
Cover with predisposition connection system with predisposition connection system.
Anti-spark repair
Transparent protection arrester with friction joint.

Optional Equipments

cod. IA-2:  DUST EXTRACTOR - TWO CONNECTIONS
DUST EXTRACTOR kit with two suction mouth: complete of dust filter bag in flexible aluminum pipes and hose clamps. The extractor is mounted inside the base and wired to the electrical panel.TECHNICAL FEATURES- Motor: Volt 400 - Rpm 2800 - kW 0,55- Max flow rate: 1.000 m3 / h- Max total pressure: 85 mm H2O
This product data sheet does not constitute a contractual obligation.
We reserve the right to modify and/or improve our machines without prior notice.
Some photographs and illustrations are purely demonstrative and may differ from the real ones.